Mounting Instructions; Electrical Installation - Nederman 744 Serie Manual De Instrucciones

EN Cable Reel Serie 744
Table of contents

1 Mounting instructions

2 Electrical installation

3 Ratchet mechanism (not fitted on all models)
1
2
6
................................................................................................................................................
...................................................................................................................................................
Mounting instructions
The cable reels are designed for wall mounting. Choose a position where the
cable is bent as little as possible against the outlet rollers. Select a level surface
on which to mount the reel. Ensure that suitable fixing bolts are used and
that they are secured. The bolts must each stand at least the following torque
force:
• Cable reel serie 744: 2600 N
Electrical installation
CAUTION!
Main circuit connection must be done by a qualified installation contractor.
Choose a connecting cable with at least the same design and quality as for the
distribution cable.
The cable reel is supplied without an outlet socket.
The following applies if such a device is to be fitted:
• A minimum protection class of IPX4 to be used.
• The earth (yellow/green cable) should be connected to the applicable
terminal in the outlet socket.
• Strain relief and flexible cable sheaths should be secured.
Instruction manual
.............................................................................................
English
6
6
7