Zavor LUX LCD Manual Del Usuario página 9

Select the desired cooking function and setting. Adjust the time if needed. Press
TIME DELAY and use the dial to adjust the delay time. Press the START/STOP
button to confirm. The multi-cooker begins cooking after the time delay has
elapsed.
For Example: It is 8:00 am, and you want your dinner to be ready at 6:00 pm. You
use a recipe that calls for a SLOW COOK function and the Beans setting (which is
8 hours preset cooking time). Turn the pressure regulator knob to "Steam." Turn
the dial until the SLOW COOK function is selected and confirm it by pressing the
dial. From the settings shown to the right, select the Beans setting and confirm it
by pressing the dial. To program your delay time, press the TIME DELAY button
and adjust the time so, the screen displays 2 hours. Press the START/STOP button
to confirm, and you are all set! The unit starts cooking at 10:00 am and, your dinner
will be ready around 6:00 pm. Please note that exact cooking time may vary since
the unit needs to build the temperature and/or pressure.
CAUTION: DO NOT LEAVE PERISHABLE FOODS SUCH AS MEAT, POULTRY,
FISH, CHEESE AND DAIRY PRODUCTS AT ROOM TEMPERATURE FOR MORE
THAN 2 HOURS (OR MORE THAN 1 HOUR WHEN THE ROOM TEMPERATURE IS
ABOVE 90°F). WHEN COOKING WITH THESE FOODS, DO NOT SET THE DELAY
FUNCTION FOR MORE THAN 1-2 HOURS.
KEEP WARM – Used for keeping cooked food warm up to 12 hours or reheating it.
After the cooking time is over, the unit automatically switches to the KEEP WARM
function (at a temperature of 165°F) for up to 12 hours. Press the START/STOP
button to cancel the KEEP WARM program.
To reheat food:
1. Place the removable cooking pot into the multi-cooker. Then place the food
into the removable cooking pot to heat up.
2. Place the lid on the multi-cooker; align the pin on the handle with the
condensation collector, and turn it counterclockwise until it locks into place.
The locking pin clicks when it's in place.
3. Turn the pressure regulator knob to STEAM.
4. Press the KEEP WARM button. Adjust time and then press the START/STOP
button to begin heating the food.
5. When the time is up, the unit beeps to let you know the heating process has
ended. Please note the minimum amount of time for this function is 30 min.
PANEL LOCK – Used to disable and re-enable the buttons. This is for safety
reasons, to prevent children from tampering with the multi-cooker. To lock or
unlock, press and hold the PANEL LOCK button.
7