Tools And Materials; Before You Begin - Kohler K-6534 Guia De Instalacion

Tools and Materials

Tape
Safety
Measure
Glasses
Template
(supplied)
Sealant
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury or product damage. Cast
iron sinks are very heavy. Get help lifting the sink into place.
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
Inspect the drain and supply tubing. Replace if necessary.
Due to the variety of installations possible with this sink, you
may need to use procedures other than those described. Because
of the variety of tiles available, you must take careful
measurements prior to installation.
It is very important that the proper materials are used with your
sink. Proper selection of tile is critical for a secure installation.
3/8" (1cm) tile is recommended. Because of the variance in tile
thickness, your carpenter, tiler, and plumber must be aware of the
exact type of tile you choose.
1019950-2-B
Plus:
• 1/2" or larger drill bit
• Hole saw 1-3/8"
Pencil Drill
• Support frame members
• Sanding block
• Assorted sandpaper
• Orbital sander (optional)
Scissors
2 Kohler Co.