Kit Assembly - Metra 99-7618G Instrucciones De Instalación

ISO DIN head unit provisions
1. Attach the (4) white panel clips to
the radio housing
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
3. Slide the aftermarket radio into the
radio brackets/pocket assembly
and secure with the screws
supplied with the radio. (Figure A)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Reassemble dash in reverse
order of disassembly using the
99-7618G radio trim panel
instead of the factory panel.

Kit Assembly

(Figure A)
99-7618G
3