Kit Preparation; Kit Assembly - Metra 95-7336 Instrucciones De Instalación

Kit Preparation

1. Attach the climate control to the 95-7336 trim plate using the factory hardware.
(Figure A)
2. Attach the (6) panel clips to the 95-7336 trim plate. (Figure B)
Continue to kit assembly
(Figure A)

Kit Assembly

(Figure B)
Double DIN/Stacked ISO DIN
radio provision
1. Attach the double DIN brackets to
the aftermarket radio. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
3. Then mount the radio in the
sub dash.
4. Reassemble dash in reverse order
of disassembly using the 95-7336
trim panel instead of the factory
trim panel.
3
(Figure A)