Wps Settings - Steren COM-817 Manual De Instrucciones

4.2.5 MAC Clone
The WAN port of repeater has a unique MAC address assigned by
manufacturer; it called as "Default MAC". The "Clone MAC" is used
for some special situations; For example, ISP only allows certain MAC
address to access the Internet, thus you can modify your WAN port's
MAC address in accord with the requirement of ISP, avoiding ISP's
detection.

4.3 WPS Settings

This repeater also provides WPS button, you only need to push the WPS button
in this repeater and the wireless network card that support WPS function, then
the repeater will be encrypted to WPA2-AES mode automatically.
Note:
If you have configured encryption mode in your repeater, then when you use
this WPS function, please configure the authentication type to none, and then it
will be encrypted to WPA2-AES mode automatically. If you don't want to change
your authentication type, then when you use this function, the repeater will be
encrypted to the mode that you have configured.
20 20
Wi-Fi Protect
function can help you create a safe
network easily. You can through 'PIN
Input Config (PIN)' or 'Push Button
(PBC)'to encrypt your network.
Setup (WPS)