Steren COM-817 Manual De Instrucciones página 84

4.12.1. Firmware
Click "Browse..."button and select a File to upgrade, after you have selected
the appropriate file, click "Upgrade" button to execute upgrade procedure.
Do not cut off the power supply during the process of upgrading.
4.12.2 Time Settings
You can choose the time server and the time zone for the system time.
4.12.3 Password
The default username/password is guest/guest. To ensure the Repeater's
security, it is suggested that you change the default password to one of your
choice, here enter a new password and then Re-enter it again to confirm your
new password. Click "Save" button to save settings.
4.12.4 WOL
Input host MAC address, and then click button of "Wake up" to wake up the
target host in the LAN.
4.12.5 System Logs
Examine system logs. You can configure items shown in one Page, the
default is 10.
4.12.6 Remote Management
WEB Management Status: the default is disable. Repeater can be accessed
on the remote site using "Web setup". Check the "Management Port" and
enter the port number and then press "save" button to enable web mana-
gement.
4.12.7 Factory Defaults
Click "Restore" button, the Repeater will erase all of your settings and re-
place them with the factory defaults, make sure you have backup current
39 39