Steren COM-817 Manual De Instrucciones página 73

- Key Renewal: you can configure the renewal time between 60 to 86400
seconds.
- Key Length description: you need to input 8 to 63 ASCII characters no
matter which type you select.
4.5.2.4 WPA2-PSK
The WPA2-PSK is similar to WPA-PSK and with stronger encryption method
than WPA-PSK, using WPA2-PSK; you should input password (leave this
value in the range of 8 to 63 characters) and key renewal time (leave this
value in the range of 60 to 86400 seconds).
4.5.2.5 WPA/WPA2-PSK
This mode mixes WPA-PSK and WPA2-PSK modes, which provides higher
security level; you can configure it according with WPA-PSK or WPA2-PSK.
4.5.3 Wireless MAC Filtering
- MAC Filter Status: the default is disable. You can filter wired users by
enabling this function; thus unauthorized users cannot access the network.
- Description: describe MAC Filter list to tell from different MAC Filter lists.
- Rule: you can select permit or deny. The default is permit.
- MAC address: input the MAC address that you want to control. The default
format is **-**-**-**-**-** (e.g.: 00-22-33-da-cc-bb).
5.5.4 WDS
4.5.4.1 WDS Settings
If you have selected WDS or AP+WDS mode in Wireless Basic-Radio Mode,
follow the following configurations.
28 28