Static Routing - Steren COM-817 Manual De Instrucciones

4.9 Static Routing

Most of broadband and wireless repeaters use NAT mode, so this feature is
designed for most common network environment.
- Destination Network or IP Address: Specify a certain destination Network or
IP address which static route forward to.
- Subnet Mask: Subnet mask is used for distinguish Network portion and
Host portion for an IP address.
- Next-hop IP Address: This is an IP address of the next-hop device (and also
is the gateway address for local host) that allows forwarding data between
repeater and remote network or host.
- Routing Table: You can check out all current route items, click "delete"
button to delete a route item existed in routing table.
37 37