SOMFY Oximo 40 Manual Del Usuario página 42

Oximo 40 WireFree™ RTS
3) Adjust the lower position of the roller shutter using the Up
or Down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new lower end limit position has been
programmed.
8.4.4 With flexible straps and without stops on the end
slat
If the roller shutter is fitted with flexible straps but without
stops on the end slat, the lower and upper end limits may
be modified.
Readjusting the upper end limit
1) Raise the roller shutter to the set upper end limit
position.
2) Press the Up and Down buttons until the roller shutter
moves up and down.
3) Adjust the upper position of the roller shutter using the Up
or Down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new upper end limit position has been
programmed.
Readjusting the lower end limit
1) Lower the roller shutter to the set lower end limit
position.
2) Press the Up and Down buttons simultaneously until the
roller shutter moves up and down.
3) Adjust the lower position of the roller shutter using the Up
or Down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new lower end limit position has been
programmed.
40
3
or
1
3
or
1
3
or
Copyright © 2009 Somfy SAS. All rights reserved.
4
2
4
2
4