Thomas NiTiShaper T1 Manual De Instrucciones página 8

USAGE
(Stage 3 : T3 finish)
PRODUCT LIFETIME
STORAGE
DISPOSAL
TRACEABILITY
PICTOGRAMS
CAUTION – This symbol means "Caution, see
instructions for use"
LOT - This symbol must be accompanied by the
manufacturer's lot code. The lot code and the
symbol must be adjacent.
STORE IN A DRY PLACE - Keep away from
rain
STERILISATION - Autoclave 134° C for 18
minutes
MANUFACTURER – This symbol must be
accompanied by the name and address of the
manufacturer (person placing the device on the
market)
CONSULT USER MANUAL
NON STERILE
NICKEL TITANIUM
Class IIa medical devices certified by the
notified body GMED
Page 3/3
INSTRUCTION MANUAL
• Rotation speed: 300 to 500 rpm
• Couple: 3N.cm to 4N.cm
2. In the case of complicated canals, we recommend using 2/3 of the working length of the T2,
then using a K stainless steel K file. You can then use the full working length of the T2.
3. Clean and irrigate the canal (See "Exploring the canal," above).
1. Introduce in rotation, the third NiTiShaper instrument "T3" with the black ring. Apply light
pressure combined with brushing movements. You can reach the working length
• Rotation speed: 300 to 500 rpm
• Couple: 3N.cm to 4N.cm
2. Clean and irrigate the canal (See "Exploring the canal," above).
The product lifetime is estimated at 3 years from the date of manufacture but may vary depending on the
conditions of use, the frequency of use, or when the sterilisation has reached a maximum of 10 cycles.
Store NitiShaper in its original packaging before first use, in a clean, dry place protected from moisture
and apply the "First In / First Out" management method.
Used instruments must be disposed of in accordance with current regulations, following a circuit for
infectious health care waste.
For patient safety, it is the responsibility of the healthcare professional to keep the reference and batch
number of the devices used. This information is given on the labels affixed to the packaging of THOMAS
products.
We advise against using a THOMAS product whose label is illegible.
Translated from French to English
NiTiShaper
2nd edition : 01/10/2019