KTM POWERPARTS 64112940000 Manual Del Usuario página 5

Scope of supply
1x handlebar end mirror (preassembled)
1x screw M6x70
1x toothed washer
1x nut
1x sleeve, wide (optional)
1x sleeve, narrow
1x bushing, large (optional)
1x bushing, medium (optional)
1x bushing, small
Preassembly (if not preassembled)
- Mount screw on mirror
- Mount toothed washer (included).
- Mount narrow sleeve with small bushing
- Mount nut (all included).
The projections of nut
Assembly
- Loosen screw and remove handlebar weight.
- Position preassembled mirror
- Tighten screw to 13 Nm.
Modifi cation for left side
- Remove screws and take off spacer disk
(both included).
(both included).
engage in the recesses of sleeve
.
with protective fi lm.
.
5