Twist-Lock Fastener - Sauder Harbor View Serie Manual Del Usuario

Step 4
Fasten four METAL BRACKETS (4G) to the SMALL ENDS (F).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the METAL BRACKETS are even with the edges
å
of the SMALL ENDS.
Fasten the END MOLDINGS (G) to the SMALL ENDS (F). Use
å
four BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS on the SMALL ENDS and into the holes in
the END MOLDINGS.
Edge with
TWIST-LOCK®
FASTENERS
4G
Page 8
F
G
BLACK 9/16" LARGE HEAD SCREW
(8 used for the METAL BRACKETS)
F
F
423661
1S
4G
These holes are
closer to this edge.
G
F
These surfaces
should be even.
www.sauder.com/services