CASUALPLAY Multiprotector Fix Instrucciones página 24

WARNINg: In order to use the MULTIPROTECTOR FIX as group 1 (from 9 to
18 kg) it should be used along with the Impact Shield.
WARNINg: The headrest adaptor should only be used as group 1 for those
children whose head does not reach the headrest of the MULTIPROTECTOR
FIX. When necessary, remove this headrest adaptor, consult the "removing the
headrest adaptor" section (fig.22).
Installing the Impact Shield
WARNINg: Do not fit the Impact Shield too tightly or too loosely to the child's
body.
MULTIPROTECTOR FIX
Install the
•
MULTIPROTECTOR FIX is fitted with a headrest adaptor. This can only
The
•
be used by children in Group 1, whose head does not reach the headrest of
the restraint system.
Seat the child in the child restraint system and fit the Impact Shield
•
(fig.23).
The Impact Shield is designed to fit perfectly in the space between the base
•
of the seat and the armrest.
Fit the Impact Shield to the child using the button found on the middle
•
(fig.24).
The Impact Shield has 3 positions to suit the child's size (
•
Insert the abdominal part of the seat belt through the guide (displayed in
•
red) of the Impact Shield (fig.26). Fasten the buckle and tighten the seat
belt (fig.27-28).
Pass the diagonal part of the seat belt through the guide and tighten it again.
•
(fig.29-30).
How to take the child out of the MULTIPROTECTOR FIX (group 1)
Unfasten the vehicle seat belt, and open the Impact Shield.
•
Take the child out of the restraint system.
•
Fit the Impact Shield again and fasten the seat belt.
•
22
GROUP 1 (from 9 to 18 kg)
fig.25).