16. IP20 The fan is designed for use interior spaces. It is not
suitable for installation in a bathroom or habitually humid areas.
Please make sure that the lamp never comes into contact with
water.
17. You must make sure that children do not play with this lamp.
18. Always switch off the appliance and disconnect it from the
power supply before installation, changing the light bulb,
maintenance and cleaning.
19. This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with appliance. Cleaning and user
maintenance shall not be made by children without
supervisions.
20. T he means for disconnection from the supply mains
having a contact separation in all poles that provides full
disconnection that must be incorporated in the fixed wiring
in accordance with the wiring rules.
21.Regarding the instructions for the method of fixing and
how to install the fan, thanks to refer to the section
"INSTALLATION".
22. Regarding the method of the cable connection, thanks to
refer to the section "CABLE INFORMATION".
23.
The light source of this luminaire is not replaceable; when the
light source reaches its end of life the whole luminaire shall be
replaced.
24.Warning:Do not stae directly at the LED light beam.
Description of symbol:
You will find all the symbols related to his lamp on both the
product label and the box in which it came.
Insulation class I . This fan must be connected with its ground
wire (green and yellow cable) to the earthing conductor.
AC - Alternating current voltage
Frequency (Hertz)
Voltage in Volt
Intensity of current in watts
Minimum separation distance between the lamp and any
flammable object in metres. The exact distance can be found on
the label of the lamp.
19