Publicidad
Idiomas disponibles
Idiomas disponibles
For indoor use only
Level of protection against intrusion. You can find the
corresponding protection level on the label of the lamp.
Switching it on
Connect to the power supply and check the functioning of the
fan. A series of pulses controls the speed of the fan, as follows:
Press once - fast; press 2 times - medium speed; press 3 times -
slow; press 4 times - off. The speed adjustments to increase or
reduce the temperature will depend on factors such as the size
of the room, its height, the number of fans available, etc, Using
the sliding switch, you can control the direction of the fan,
forward or backward.
Hot temperatures/low position - (forward) The fan turns anti-
clockwise. The downward air current creates a cooling effect, as
shown in figure A.
This enables you to set the air conditioning to a higher
temperature without compromising on comfort.
Low temperatures/upper position - (backward) The fan turns
clockwise. The upward air current causes the warm air in the
upper part of the room to move to other areas, as show in figure
B.
This enable you to set the heating to a lower temperature
without compromising on comfort.
(Before using your fan in this position, consult point 10 of the
safety instruction).
NOTE: Switch the fan off and wait until it has stopped
completely before changing the position of the sliding switch
forward or backward.
Maintenance
1. Due to the normal movement of the fan, it is possible that some connections may
come lose. Check the support connections, the supports and attachment of the
blades twice a year. Make sure they are securely attached.
20
Publicidad
