Playing A Tape In Various Modes - Sony WX-C5000 Manual De Instrucciones

Ocultar thumbs Ver también para WX-C5000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Locating the beginning of a track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily.
SEEK/AMS
To locate preceding
tracks
Note
The AMS function may not work when :
— the blanks between tracks are shorter than four
seconds.
— there is noise between tracks.
— there are long sections of low volume or quiet
sections.
Changing the displayed items
Each time you press (DSPL) during tape
playback, the display changes as follows:
B Tape playback
* While the ATA function is activated.
Playing a tape in various
modes
You can play the tape in various modes:
•REPEAT (Repeat Play) repeats the current
track.
•; (Dolby NR) lets you select the Dolby* NR
B system.
•METAL plays CrO
or metal tape.
2
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•BL SKIP (Blank Skip) skips blanks longer
than eight seconds.
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D symbol
; are trademarks of Dolby Laboratories
Licensing Corporation.
To locate succeeding
tracks
B Clock
B Frequency*
Playing a track repeatedly
— Repeat play
Press (2) (REPEAT) during playback.
"REP" appears on the display and repeat
play starts.
To return to the normal playback mode, press
(2) (REPEAT) again.
Playing a tape recorded in the
Dolby B NR system
Press (3) (SHUF/;) during playback.
";" appears on the display.
To return to the normal playback mode, press
(3) (SHUF/;) again.
Playing a CrO
or metal tape
2
Press (4) (METAL) during playback.
"MTL" appears on the display.
To return to the normal playback mode, press
(4) (METAL) again.
Switching to the radio while fast-
winding a tape
— Automatic Tuner Activation (ATA)
Press (5) (ATA) during playback.
"ATA" appears on the display.
To return to the normal playback mode, press
(5) (ATA) again.
Skipping blanks during tape
playback — Blank skip
Press (6) (BL SKIP) during playback.
"BL SKIP" appears on the display.
To return to the normal playback mode, press
(6) (BL SKIP) again.
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido