Overview; Control Buttons - DJO CEFAR REHAB X2 Manual De Instrucciones

4. OVERVIEW

10

CONTROL BUTTONS

1. ON/OFF
· Turns the stimulator on and off.
· Turns the stimulator off even when the key lock
is activated.
· Can be used for terminating the stimulation at all
times.
2. INCREASE (left and right channel)
· Increases the amplitude (intensity of stimulation).
Press and hold the button to increase the amplitude
continuously.
Note! Always increase the amplitude cautiously.
· Terminates AUTO stimulation mode.
· Increases the number of minutes when setting the
timer (right button).
· Used when turning the program lock on and off (left
button)*.
· Scrolls through choices in programming mode*.
3. DECREASE (left and right channel)
· Decreases the amplitude (intensity of stimulation).
Press and hold the button to decrease the amplitude
continuously.
· Deactivates the key lock.
· Terminates AUTO stimulation mode.
· Decreases the number of minutes when setting the
timer (right button).
· Used when turning the program lock on and off (left
button)*.
· Scrolls through choices in programming mode*.
4. AUTO (left and right channel)
· Starts the AUTO test mode.
· Confirms the selected amplitude level in AUTO test
mode.
5. PROGRAM
· Selects a program (P1–P30).
Use P+ to step forward through the programs and P–
to step backward.
· Pauses an ongoing program.
· Used when activating/deactivating the program lock
(P+)*.
2
3
4
5
5
9
6. TIMER
· Initiates the timer setting.
7. PROGRAMMING/CONFIRMATION (S=SET)
· Turns the stimulator into programming mode for
custom programs P28–P30 when pressed for 2
seconds.
· Confirms settings in programming mode.
8. HAND SWITCH CONNECTION
· By using the hand switch, the contractions in pro-
grams with intermittent stimulation can be manu-
ally controlled.
9. CABLE HOLDER
*Professional use
1
2
3
4
6
7
8