Program Lock; Disable The Auto Function; Compliance - DJO CEFAR REHAB X2 Manual De Instrucciones

PROGRAM LOCK

The stimulator can be locked to prevent changing of programs.
26 To activate/deactivate the program lock:
1. Select the program you want to lock/unlock, see section STEP-BY-STEP USE.
2. Press the PROGRAM button
onds.
3. Press the left INCREASE or DECREASE button
play when activating the program lock and "OFF" when deactivating it. (The button toggles between
ON and OFF).
4. Press the PROGRAM button

DISABLE THE AUTO FUNCTION

The stimulator can be locked to disable the AUTO function.
To enable/disable the auto function:
1. Press the PROGRAM button
seconds.
2. Press the left INCREASE or DECREASE button
play when the auto function is enabled and "OFF" when the function is disabled. (The button toggles
between ON and OFF).
3. Press the PROGRAM button

COMPLIANCE

Compliance gives you the possibility to monitor the use of the stimulator:
1. Turn the stimulator ON.
2. Press the TIMER button
3. The left side of the display shows the usage time in hours and the right side in minutes. To reset the
usage time, press the right DECREASE button
4. Wait for 5 seconds or press the TIMER button
5. The left side of the display shows the total usage time in hours and the right side in weeks. The total
usage time cannot be reset.
6. Wait for 5 seconds or press the TIMER button
AUTO AUTO
and the left DECREASE button
S
P+ P–
AUTO AUTO
to finish the program lock setting.
S
P+ P–
AUTO AUTO
and the left INCREASE button
S
P+ P–
AUTO AUTO
to finish the setting.
S
P+ P–
and the right DECREASE button
AUTO AUTO
S
P
AUTO
S
P
AUTO
S
P
simultaneously for 2 sec-
. "ON" is shown on the left side of the dis-
AUTO AUTO
P S
simultaneously for 2
. "ON" is shown on the left side of the dis-
AUTO
P
AUTO AUTO
S
P
simultaneously for 2 seconds.
for 2 seconds.
.
P
AUTO AUTO
S
P
AUTO
to exit compliance mode.
AUTO
AUTO AUTO
P S
AUTO
S
AUTO AUTO
S