Display Symbols - DJO CEFAR REHAB X2 Manual De Instrucciones

DISPLAY SYMBOLS

6
8
1. BROKEN CIRCUIT (left and right channel)
Broken circuit. The reason for a broken circuit may be too high resistance or cable breakage. See chapter
TROUBLESHOOTING .
2. PAUSE
Paused program.
3. KEY LOCK
Activated key lock. The key lock is automatically activated if no key is pressed for 20 seconds.
Deactivate the key lock by pressing the left or right DECREASE button.
4. PROGRAM LOCK
Activated program lock.
5. BATTERY STATUS
Empty batteries. This symbol is only shown when the batteries are almost empty.
6. PROGRAM NUMBER
Selected program number.
7. REMAINING TIME
Remaining program time in minutes and seconds. Time is flashing during timer setting.
8. AUTO STIMULATION MODE/CEFAR EASY TOUCH™ (left and right channel)
Activated automatic amplitude setting. "AUTO" is flashing during test mode and steady during stimulation.
9. AMPLITUDE BARGRAPH (left and right channel)
Selected amplitude as a bargraph.
10. AMPLITUDE LEVEL (left and right channel)
Current of selected amplitude in mA (not shown in AUTO stimulation mode).
11. WORK/REST (intermittent stimulation)
Work/rest indication for programs with intermittent stimulation. The upper part of the symbol is flashing dur-
ing work time and the bottom part during rest time.
11. HIGH/LOW FREQUENCY (mixed frequency stimulation)
High/low frequency indication for mixed frequency programs. The upper part of the symbol is flashing during
high frequency and the bottom part during low frequency.
1 2 3 4 5
9 10 11 10
1
7
8
9
11