Sauder 412321 Manual Del Usuario página 18

14 14
D10
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D10
D962
1. Insert the DRAWER SIDES (D10 and D11) at an angle into the slot at each end of the DRAWER FRONT (J).
2. Slide the DRAWER BOTTOM (D962) into the grooves in the DRAWER SIDES (K and L) and DRAWER FRONT (J).
3. Fasten the DRAWER BACK (D62) to the DRAWER SIDES (D10 and D11). Use four BLACK 1-9/16" FLAT HEAD
SCREWS (JJ).
Repeat steps 14 and 15 for the remaining drawer.
Page 18
1st
D11
J
3rd
D62
D11
www.sauder.com/services
D10
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
2nd
D962
D11
J
JJ
412321