Motorola PMPN4156 Guia Del Usuario página 46

Charging Pocket Installation
Removing Charging Pocket from Multi-Unit Charger
AS000060A01 Charger Pocket
Figure 7: Installing and removing charging pocket.
1. Remove the Cover Label on the Charging Pocket.
2. Remove the screw that secures the Charging Pocket to the base.
3. Lift the Charging Pocket a few inches away from the base.
4. Remove the Pocket Harness by pulling straight up on the connector
(Refer to Figure 7).
AS000061A01 Charger Pocket
Cover Label
Screw
Multi-Unit
Charger Base
46
Cover Label
Screw