Dyna-Glo DGA550SSP Manual Del Usuario página 11

TROUBLESHOOTING
PROBLEM
Nogasfloworan
obstructedgasflow.
POSSIBLE CAUSE
1. Tank valve not on or fully
opened.
2. Empty tank.
3. Poor connection between
valve regulator and LP
cylinder coupling.
4. Burner inlet blocked.
CORRECTIVE ACTION
1. Fully open tank valve by turning
counterclockwise.
2. Check fuel level and replace fuel if
necessary.
3. Turn off grill knobs, close the LP
cylinder valve at top of cylinder
and check the connection between
the regulator valve and cylinder
coupling. Disconnect and reconnect,
if necessary.
4. Clean the burner inlet (venturi) and
burner as described by the Care and
Maintenance section in the manual.
27