Adjust The Exhaust Adaptor; Connecting Ductwork - Haier QVM7167RNSS Instrucciones De Instalación

B6.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure to
3
keep power cord tight. Be careful not to pinch the
cord, especially when mounting flush tobottom of
cabinet.
Tighten the two screws to the top of the oven
4
completely. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
Install grease filters. See the Owner's Manual
5
packed with the oven.
31-7000110 Rev. 1
Installation Instructions
(continued)
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
B7. ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
B8.

CONNECTING DUCTWORK

1 Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
2
Back of
Oven
Cover Plate
House Duct
19