Kit Assembly - Metra 95-7622HG Instrucciones De Instalación

Double DIN radio provision
1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Attach the radio to the brackets
with the screws supplied with the
radio and mount into the dash
opening. (Figure A)
3. Snap the radio housing over the
radio/bracket assembly.
4. Reassemble dash in reverse order
of disassembly.
95-7622HG

Kit Assembly

(Figure A)
3