Publicidad
I N S T A L L I N G T H E B A T T E R I E S
The Battery Door
1
by sliding it.
Install four AA batteries (1.5 V) into the battery chamber and close
2
the Battery Door
Switch on the camera by turning the Shooting Mode Lever
3
shooting mode besides "Off". You will see the battery light turn on in
the Film Counter Window
B A T T E R Y L I G H T I N D I C A T I O N
Next to the Exposure Compensation Switch
Indication Light
Blue light on:
Blue light blinking: The batteries are low and need to be changed.
L O A D I N G T H E F I L M
Open the Camera Back Door
1
down.
Install a fresh pack of Fujifilm Instax Wide film into the film chamber.
2
Make sure that the yellow mark
the yellow mark on the film pack.
Close the Camera Back Door
3
Turn on the camera by switching the Shooting Mode Lever
4
either "Auto Shooting Mode", "Bulb Mode", or "Fixed Shutter Speed
Mode". Press the Shutter Release Button
slide of your new film pack. Please make sure not to block the Film
Ejection Slot
is located at the bottom left of the camera. Open
1
.
1
.
3
which will indicate the battery condition:
2 4
The battery condition is normal and the camera is
ready to shoot.
when the dark slide is coming out.
8
, there is a Battery
1 4
by pressing the Back Door Lock
4
inside the film chamber matches
6
.
4
once to eject the dark
7
to any
2
5
to
2
1 1
Publicidad
