Navigating The Menu - Siemens SITRANS F FUG1010 IP65 NEMA 4X Instrucciones De Operación

Connecting

3.3 Navigating the Menu

3.3 Navigating the Menu
Menu Navigation and Initial Power-up
Before you can navigate the menu you must first power-up the flow meter. Follow the
instructions below to ensure safe connection of power to the meter and then proceed to the
menu navigation.
NOTICE
Power Supply Damage
Improper power connections will damage power supply.
Ensure that all AC or DC power supply connections are properly connected to the
appropriate power source (100-250 VAC @ 50/60 Hz or 9-36 VDC).
Electrical Shock Hazard
Certain parts inside the device carry dangerous high voltage that may lead to fire, electric
shock or serious injury.
The transmitter must be grounded and the top cover closed before applying power to the
device.
Power-up Procedure
1. Connect the power cables to the appropriate power source (90-240 VAC @ 50/60 Hz or
9-36 VDC). Close top cover.
2. Apply power.
3. Within 10 seconds of power-up the main display will become active and a typical Siemens
graphic will appear briefly. The screen also identifies the software version of the unit as
shown below.
26
WARNING
FUG1010 IP65 NEMA 4X Quick Start
Operating Instructions, 06/2014, A5E02951527-AC