Alarm Codes - Siemens SITRANS F FUG1010 IP65 NEMA 4X Instrucciones De Operación

Troubleshooting

5.2 Alarm Codes

5.2

Alarm Codes

The following alarm codes appear on the main display of the flow meter.
Table 5- 2 Alarm Codes
Letter Codes
SPACE Spacing
HI/LO Rate
FAULT Fault
TURB Turbulence
MEMRY Memory
MAKUP Makeup
The displays shown below indicate where the Alarm Codes appear on the screen. Press
<UP> or <DOWN> Arrows to change screen views.
①
①
52
Alarm Code
Sensor spacing may need adjustment
Flow above High setting or below Low setting
Three continuous seconds without new data update
Current turbulence percentage exceeds the alarm set point
Last valid reading for a selected interval during Fault condition
In-Process Makeup occurred
Alarm Codes
Alarm Codes
Description
FUG1010 IP65 NEMA 4X Quick Start
Operating Instructions, 06/2014, A5E02951527-AC