General Safety Instrucions For Electrical Power Tools - AL-KO EKS 2000/35 Instrucciones De Uso

en
Type
Chain brake
Max. chain speed
Volume of chain oil tank
Net weight without chain and chain bar
Net weight with chain and chain bar
Sound power level LWA (2000/14/EC)
Sound pressure level LPA
Max. vibration acceleration avhw (k=3)
The specified values have been establis-
hed based on a standardised test pro-
cess and can be used for comparing dif-
ferent electrical tools with one another.
In addition, these values are suitable for
estimating in advance the loads to which
the user is exposed due to vibration.
WARNING!
The actual vibration values may differ
from those specified, depending on what
the electrical tool is used for.
Take measures to protect yourself
against vibration loads. In doing so, take
account of the entire working process,
i.e. also times during which the electrical
tool is operating without load, or is swit-
ched off.
Suitable measures include regular main-
tenance and care of the electrical tool
and the tool attachments, keeping your
hands warm, taking regular breaks and
planning the working sequences effec-
tively.
WARNING!
Wear ear defenders to prevent impair-
ment of hearing.
CAUTION!
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock,
fire and/ or serious injury.
28
EKS EKS
2000/35 2400/40
Yes Yes
13.5 m/s 13.5 m/s
0.150 l 0.150 l
4.9 kg 5.2 kg
5.6 kg 6.0 kg
110 dB(A) 110 dB(A)
96 dB(A) 95 dB(A)
5,049 m/s² 5,945 m/s²
CAUTION!
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings
refers to your mainsoperated (corded)
power tool or battery-operated (cordless)
power tool.
CAUTION!
Use the equipment only if it is in correct
operating condition!
Before using, check the machine, ca-
ble and plug for damage; any damaged
parts must be repaired or replaced at a
specialised repair centre.
CAUTION!
Risk of injury!
Safety and protective devices should not
be disabled.
CAUTION!
Gefahr durch Strom!
Immediately disconnect the plug from
the mains if the cable is damaged or se-
vered!
GENERAL SAFETY INSTRUCIONS FOR
ELECTRICAL POWER TOOLS
Work area safety
Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
EKS 2000/35 / EKI 2200/40 / EKS 2400/40
Technical data
EKI EKS
2200/40 2400/40 S
Yes Yes
13.5 m/s 13.5 m/s
0.200 l 0.150 l
5.2 kg 5.2 kg
6.0 kg 6.0 kg
108 dB(A) 110 dB(A)
94 dB(A) 95 dB(A)
5,061 m/s² 5,945 m/s²