Safety Instructions - AL-KO EKS 2000/35 Instrucciones De Uso

en
Maintain power tools. Check for misalign-
ment or bindingof moving parts, breakage
of parts and any othercondition that may
affect the power tool's operation. Ifdama-
ged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained powertools.
Keep cutting tools sharp and clean. Pro-
perly maintainedcutting tools with sharp cut-
ting edges are less likely to bindand are ea-
sier to control.
Use the power tool, accessories and tool
bits etc. in accordancewith these instruc-
tions, taking into accountthe working con-
ditions and the work to be performed. Use
of the power tool for operations different from
thoseintended could result in a hazardous si-
tuation.
Service
Have your power tool serviced by a quali-
fied repair personusing only identical re-
placement parts. This will ensurethat the
safety of the power tool is maintained.

SAFETY INSTRUCTIONS

Operator:
Young people under 16 years of age, and
people who do not know the instructions for
use, are not allowed to use the machine.
The machine must not be operated if the ope-
rator is under the influence of alcohol, drugs
or medication.
Personal protective equipment:
Wear clothing and protective equipment in
accordance with the regulations in order to
avoid injuries to the head and limbs, as well
as to avoid hearing impairment.
The clothing must be appropriate (tightly fit-
ting) and must not restrict movements. If you
have long hair, it is essential to wear a hair
net.
30
General safety instrucions for electrical power tools
The personal protective equipment compri-
ses:
Protective helmet
Hearing protection (e.g. ear defenders)
Protective glasses or face visor incorpo-
rated in the protective helmet
Protective trousers with cut protection in-
lay
Sturdy working boots
Safety boots with high-grip sole and steel
toe caps
Working area:
No-one else is allowed to be in the working
area of the saw. Pay attention to children and
animals.
The user is responsible for accidents invol-
ving other people and their property.
Keep the working area free from off-cuts and
other objects – danger of stumbling.
Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
Do not use the chain saw in an area where
there is a fire risk or in a potentially explosive
atmosphere.
Operating times:
Comply with working time regulations in force
in your country.
Work only when there is adequate daylight or
artificial lighting.
Operation:
CAUTION!
The machine must not be put in opera-
tion before it has been assembled com-
pletely.
CAUTION!
Always perform a visual check prior to
start-up.
The machine must be in a safe operating con-
dition.
Never work alone.
Immediately renew damaged or worn parts.
Remove setting and assembly tools before
starting operation.
Do not use the chain saw for levering or mo-
ving wood.
Only use the machine if it is in the technical
condition stipulated by the manufacturer.
EKS 2000/35 / EKI 2200/40 / EKS 2400/40