Bostitch BT1855 Especificaciones Técnicas (Traducción Original página 9

GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this
document do not constitute CE compliance for the products.
CONTACT ACTUATION MODE
The common operating procedure on "Contact Actuation Mode" or "Bump Mode" tools is for the operator to
F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées
actuate the safety yoke while keeping the trigger pulled, thus driving a fastener each time the work is contacted.
de ce document ne signifient en rien que les produits soient conformes aux normes CE.
This will allow rapid fastener placement on many jobs, such as sheathing, decking and pallet assembly. All
pneumatic tools are subject to recoil when driving fasteners. The tool may bounce, releasing the safety yoke and
D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte
if unintentionally allowed to re-contact the work surface with the trigger still actuated (finger still holding the
Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
trigger pulled) an unwanted second fastener will be driven.
NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige
Warning: Tools must NOT be used in Contact Actuation Mode where changing from one working
position to another involves the use of ladders, stairs or similar structures such as roofs
kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
SELECTING THE ACTUATION MODE (Fig 14-15):
DK ©Stanley Bostitch. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument
udgør ikke CE overholdelse for produkterne.
To ensure safety, the user should lock the trigger (see Trigger Lockout Control above) before changing the trigger
system. To change the actuation mode, rotate the switch in the counterclockwise direction. The switch will lock
automatically when the indicating arrow is pointing down to the 3 nail icon stamped into the tool frame (Contact
SF ©Stanley Bostitch. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt
Actuation Mode) or to a single nail icon stamped in the tool frame (Sequential Actuation Mode). Unlock the trigger
kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.
to resume tool operation.
G ©Stanley Bostitch. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
UTILITY HOOK INSTALLATION (Fig 16-18):
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
These tools include an additional utility hook suitable for storage and temporary hanging of the tool.
τα προϊόντα.
Warning: Always disconnect tool from air supply before making adjustments or before attempting any part
assembly or disassembly.
I ©Stanley Bostitch. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
1. Make sure sequential actuation mode is selected (See Actuation Mode above)
documento non garantiscono la conformità CE per i relativi prodotti. 2. Depress the utility hook release button on the hook body (Fig 16)
3. Slide the utility hook into the hook attachment slot. (Fig 17)
4. Release the utility hook release button and check to ensure that the hook is locked in position. (Fig 18)
N ©Stanley Bostitch. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
dokumentet oppfyller ikke kravene for CE-merking for produktet.
m WARNING! Never use the utility hook with the contact actuation mode.
HEX WRENCH STORAGE - (Fig 19)
P ©Stanley Bostitch. Reprodução proibida sem autorização prévia. As cópias não autorizadas
A hex wrench for servicing the nailer is stored within the belt hook.
deste documento não estão em conformidade com a CE para os produtos.
E ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
S ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
PL ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
CZ ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
SK ©Stanley Bostitch. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
dokumentu nie sú v súlade s CE pre dané výrobky.
HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.