Introduction - Beko CLEARPOINT HP100S040 Instrucciones De Instalación Y Servicio

Content:

Introduction

These instructions for installation and operation will help
you to become more familiar with the CLEARPOINT
and enable you to utilize the device within the intended
scope of application. Furthermore, the instructions con-
tain important information for ensuring safe, correct and
economic operation.
The individual directions have to be followed precisely
as described in order to avoid hazards or damage. Ad-
ditionally, it will be necessary to observe the accident
prevention regulations valid in the operator's country and
at the place of installation together with the approved
rules of engineering practice concerning correct safety
and work procedures.
All persons carrying out the installation, commissio-ning,
maintenance or repair of the product on the opera-
tor's premises must have read and understood these
instructions for installation and operation. The instruc-
tions should be permanently available at the place of
installation.
6
english
Introduction.............................................................6
Guarantee...............................................................6
Safety rules.............................................................7
Areas of application................................................7
Function..................................................................8
Economic efficiency of filters..................................8
Installation..............................................................8
Filter element replacement.....................................9
Technical data HP 100 .........................................18
Technical data HP 350 .........................................20
Technical data HP 500 .........................................22
Manufacturer's Declaration ..................................24
EC Declaration of Conformity ..............................30
Guarantee
CLEARPOINT
®
of the art and the approved safety rules of engineering
practice. However, the use of the product can endanger
the health & life of attending personnel or third parties
and can have a considerable negative effect on the
product itself or on other material assets if:
- the personnel is not properly trained,
- the product is used for purposes other than
the intended application,
- the device is not correctly serviced or main
tained.
This can render the guarantee invalid.
The devices are designed for gaseous neutral fluide of
group II, PED 2014/68/EU which are free from any ag-
gressive substances, for pressure stages of max.100,
350 resp. 500 bar. Non-observance of this condition
excludes all liability claims.
In the interest of further development,
BEKO TECHNOLOGIES reserves the right to imple-
ment changes at any time, while retaining the essential
features of the device, if such changes become neces-
sary to enhance the technical capacity of the device or
for reasons of safety or standard commercial practice.
CLEARPOINT HP 100 S040-M020, HP 350 S030-M015, HP 500 S030-S050
filters are built according to the state
®