Cartridge Forks Rebound Adjustment; Externally Adjustable Forks With Ssv Rebound Adjustment - Marzocchi BOMBER Manual Del Operador

5.3 Cartridge forks rebound
adjustment
By rotating the adjustment screw (A), located on
top of the leg, you can control the fork's
REBOUND damping.
By turning the adjustment screw and using a
proper small flat tip screwdriver, you can adjust
the hydraulic configuration of the inner valves:
this means that there will be more or less oil
flowing through the valve.
• When turning the adjuster clockwise, you will
increase the rebound hydraulic damping,
making the fork return slower during the
rebound phase.
• When turning the adjuster counterclockwise,
you will decrease the rebound hydraulic
damping, making the fork more responsive
during the rebound phase.
Do not force the adjuster screw (A) past its
limits.
5.4 Externally adjustable forks
with SSV rebound adjustment
When turning the adjustment knob (B) located
on the bottom of the fork's leg, you can adjust
the damping during the rebound phase.
By turning on the adjustment screw you can
modify the hydraulic configuration of inner
valves: this means that there will be more or
less oil flowing through the valve.
• When turning the adjuster clockwise, you will
increase the rebound hydraulic damping,
making the fork slower during the rebound
phase.
• When turning the adjuster counterclockwise,
you will decrease the rebound hydraulic
damping, making the fork more responsive
during the rebound phase.
Do not force the adjuster screw (B) past its
limits.
Adjustments
59
A
B