Movement R5i Manual Del Propietário página 88

OPERATING INSTRUCTIONS
b) Pre-configured program "P1-P36". Only for Time Countdown mode. In the selection,
with the time window flashing, press "+" or "-" to modify the value. The time range varies
between 5-99 minutes. The default is 30 minutes. Press the "MODE" key to return to the
defaults.
c) FAT: body fat test. In FAT mode, the treadmill must be stopped.
• Press "START" after configuring the training mode. The screen had counted from 5 to 1
and had emitted 5 beeps. When arriving at 1, the belt is activated delicately; increase the
speed manually, and the speed will become smoothly steady.
a) During operation, press the "+", "-" or "SPEED SHORTCUT" keys to adjust the speed you
want.
b) For P1-P36, the speed and incline are divided into segments of 10. Each segment has
the same time. After the selection, the speed will be that of the current segment. When
moving on to the next segment, you will hear 3 warning beeps. Upon completion of 10
segments, the engine will be turned off and you will hear a long beep.
C) When pressing the "" key with the belt moving, START it will stop / pause. Press the
"START" key again. The treadmill will start to move, and the recorded data will be stored.
• Press "STOP" with the conveyor moving, and the conveyor will slow down slowly until it
stops everything will return to the default setting.
• Press the " " or "INCLINE SHORTCUT" keys to adjust the tilt to your preference.
• In any mode, if the security key is pulled out, the display shows: Er-7 and the alarm
sounds. The treadmill had stopped.
• The Controller will always be monitoring the belt. OR treadmill stops in case of
abnormal occurrence. The display will show the message ERR and an audible alert.
• When the display shows the message ERR, press the "STOP" key, and the message ERR
will be off.
BODY FAT FUNCTION
With the treadmill stopped, press the "PROGRAM" key until you select "FAT" and enter the
body fat function, then press the "MODE" key to set the parameter.
A) F1 defines Sex: 1 (man), 2 (woman). If the display shows the number 1, and the user is
a man, he must confirm, and the gender is selected.
B) F2 indicates Age: ranges from 1-99, and the default is 25.
C) F3 indicates the Height: varies from 100-220 cm. The standard is 170 cm
D) F4 indicates Weight: ranges from 20-150 kg. The standard is 70 kg
E) F5 the BMI. After entering all the factors and entering the 'FAT' function, the treadmill
will calculate the BMI.
Hold the support bar with both hands, wait 8 seconds, and the display will show the
BMI.We will use someone of Asian origin as an example:
BMI below 18 means underweight;
between 18 and 24 means normal weight;
between 25 and 28 means overweight;
andabove 29 means obesity.
34