Movement R5i Manual Del Propietário página 89

OPERATING INSTRUCTIONS
METER-INCH CONVERSION
• Remove the security key and press the "PROGRAM" and "MODE" keys at the same time.
The "SPEED" window displays a "0.6", which means converting from kilometers to miles.
• Remove the security key and press the "PROGRAM" and "MODE" keys at the same time.
The "SPEED" window displays a "1.0", which means converting miles to kilometers.
USER PROGRAM
The treadmill has three user modes: USER01, USER02, and USER03, which can be
adjusted by the user himself.Press the "PROG" button to AMA select the program U01
~ U03. Press the "MODE" key to set the parameters. The user can define his own 10
speed and incline segments.After defining the parameters, press "START" to start the
treadmill. The programuser's exclusive will be saved automatically and can be used in the
future.(VIII): Fan function (optional):
a) When the fan is stopped, it will start to function as soon as you press thefan button.
b) When the fan is open, it will stop working as soon as you press thefan button.
ERP INTERCONVERSION FUNCTION
If the treadmill displays ERP mode, it will go into sleep mode after four and a half
minutes. This function can be enabled or disabled. Press the "MODE" button for 3
seconds.When the display shows 'TIME' numbers 2222, ERP mode is canceled. Press the
"MODE" button for 3 seconds again.When the 'TIME' display shows the numbers 1111,
the device has returned to ERP mode.
HRC (Optional)
1. Definition: HRC is a speed mode that sets your heart rate and automatically adjusts
your speed through wired or wireless heart rate detection. It is based on a pulse rate.
2. The HRC standard consists of three groups: the speed limit for HRC1, HRC2, HRC3
modes is 9 km / h, 11 km / h and 13 km / h.
3. The HRC can define the variation of methods, orders and parameters. When pressing
the "PROGRAM" button to display the HRC, press "MODE" to confirm and proceed to
the next configuration group, you can change items (A), (B), (C) and (D) by pressing the
"SPEED" "+" / "-" It will start when you press the "START" button.
A: Age group: 15-80 years. The standard is 25 years old.
B: Heartbeat target: (220-age) * 0.6
C: The target pulse correction range: 80-180
D: The default time is 30 minutes. The correction range: 5-99 minutes.
35