Ecoustic ® Series Acoustic Guitar Amplifiers - Peavey Ecoustic E110 Manual De Operación

Ecoustic ® Series Acoustic Guitar Amplifiers
E110
E300 Session
®
Foot controller
Welcome to Peavey Acoustic Guitar Amplification!
®
Thank you for your purchase of the new Peavey Ecoustic Series amplifier! Peavey Ecoustic Series amplifiers are highly versatile
amplification systems designed for acoustic instruments, vocals and line-level devices such as samplers and audio players in
performance and rehearsal applications.
The Ecoustic E110 provides 100 watts of clean power into a system containing a 10" full-range loudspeaker and a
high-frequency horn. Both channels operate independently, with nine-band graphic EQ on Channel I and two-band adjustment
on Channel II, a Notch Filter and Phase Inverter on Channel I to control feedback, footswitchable Mute/Tuner, and more. The
master section includes digital reverb, chorus and delay with channel assignment and parameter adjustment, and the optional
foot controller (Peavey part number 03010830) allows users to access up to eight presets plus an onboard looper.
The Ecoustic Session 300 is a bi-amplified, 300-watt, three-channel acoustic amplifier with built-in effects. The amplifier
features a high-quality ribbon high-frequency driver for high levels of clarity and realism. Channels 1 and 2 both provide a
wealth of features, including individual nine-band graphic EQ, Gain, Master Volume, Phase Reverse, Piezo Switch, Tuner/
Mute, and a Notch Filter with the patented FLS
problem frequencies. Both channels have their own effects loops and direct outputs. Channel III is designed for auxiliary
instruments and devices, such as MP3 or CD players, samplers, drum machines and more. This Channel includes both 1/4" and
RCA inputs, as well as gain and tone controls. Like on the Ecoustic E110, the effects section includes Digital Reverb, Chorus
and Delay with channel assignment and parameter adjustment. The master section includes a High Frequency Level Control,
a Channel Blend Control and a Master Volume. The optional foot controller (Peavey part number 03010830) allows users to
access up to eight presets plus an onboard Looper.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
Features:
• Built-in editable digital effects, including Chorus, Delay and Reverb
• Multi-channel/multi mode operation (Session 300)
• Tilt-back design
• Studio-quality preamp design
• Multiple effects loops (Session 300)
• Built-in 9V/48V phantom power (Session 300)
• Graphic EQ
• Notch filter and phase reverse features for feedback control
• High-quality ribbon high-frequency driver (Session 300)
• Back-lit features on control panel
• Built-in 30-second Looper
VENTILATION: For proper ventilation, allow 12" clearance from the nearest combustible surface.
All vents should have a minimum of 2" of free air space so air can flow thru the unit freely for proper cooling.
ENGLISH
Feedback Locating System that allows users to quickly identify and eliminate
®
13