Tips And Troubleshooting; Stereoscopic 3D Is Not Working - Nvidia 3D VISION Guia Del Usuario

TIPs anD TRoUblesHooTInG

06
Tips aNd TrOUblesHOOTiNG
nVIDIa provides an online knowledgebase system with
answers to most common questions available 24x7x365.
You can also use it to submit questions online to our tech-
nical support staff. Please visit
for more details. Questions may only be submitted
support
in english. 3D Vision customers also have access to toll
free technical at 1-800-797-6530 between the hours of
8:00 am and 5:00 Pm Pacific Time m-f. nVIDIa recom-
mends you register your wireless glasses for support at
www.nvidia.co.uk/3dvision/register
is accessible from the U.s. and Canada only.

Stereoscopic 3D is not Working

> make sure you have activated the ir emitter. Press the green ON/
OFF button on the front of the emitter. The emitter is on when the
button is bright green.
> Check and make sure that stereoscopic 3d is enabled. Go to the
nVIDIa Control Panel Set Up Stereoscopic 3D screen.
> re-evaluate your setup. ensure there is direct line-of-sight
between the IR emitter and your wireless glasses at a range of
at least 1.5 feet (45cm) or greater. any obstructions may cause
the glasses not to function properly causing the lenses to flicker
or turn off.
Do not place objects too close or in front of the emitter which
could block the signal (e.g. keyboard, coffee mug, etc.). also, make
www.nvidia.co.uk/3dvision/
. The technical support line
39