InsTallaTIon anD seTUP
Connecting Your IR Emitter
Connect your IR emitter.
10.
The connection instructions shown on Connect your IR emitter
screen differ depending on the type of display you have
connected to your system.
•
To an LCD, CRT, or supported projector
Use the Usb cable that was shipped with your equipment to
connect your IR emitter to your computer (see page 11).
for all configurations, the 3D Vision Ready light on the emitter
glows green when the emitter is connected. The light glows bright
green when 3D Vision is active.
select Next to continue.
11.
3D Vision Ready light
and ON/Off switch
15