Tips And Troubleshooting; Stereoscopic 3D Is Not Working - Nvidia 3D VISION Guia Del Usuario

TIPs anD TRoUblesHooTInG

06
Tips aNd TrOUblesHOOTiNG
nVIDIa provides an online knowledgebase system
with answers to most common questions available
24x7x365. You can also use it to submit questions online
to our technical support staff. Please visit
com/3dvision/support
only be submitted in english. 3D Vision customers also
have access to toll free technical at 1-800-797-6530
between the hours of 8:00 am and 5:00 Pm Pacific Time
m-f. nVIDIa recommends you register your wireless
glasses for support at
register. The technical support line is accessible from
the U.s. and Canada only.

Stereoscopic 3D is not Working

> make sure you have activated the ir emitter. Press the green ON/
OFF button on the front of the emitter. The emitter is on when the
button is bright green.
> Check and make sure that stereoscopic 3d is enabled. Go to the
nVIDIa Control Panel Set Up Stereoscopic 3D screen.
> re-evaluate your setup. ensure there is direct line-of-sight
between the IR emitter and your wireless glasses at a range of
at least 1.5 feet (45cm) or greater. any obstructions may cause
the glasses not to function properly causing the lenses to flicker
or turn off.
for more details. Questions may
www.nvidia.com/3dvision/
39
www.nvidia.