Every Year; Storage; Disposal - Chicago Pneumatic RX 2 Instrucciones De Operación Y Seguridad

Safety and operating instructions

Every year

Overhauling should be done after 1 year of
continuous operation. Overhauling should for safety
reasons be performed by authorised personnel at
an authorised workshop.

Storage

WARNING Falling breaker can cause
injuries
► Place the hydraulic breaker in a safe position
where it can not fall over and cause damage.
If the hydraulic breaker is not used for a long time,
the following points have to be considered to protect
the hydraulic breaker from corrosion:
1. Clean the hydraulic breaker carefully.
2. Dismount the insertion tool and lubricate the
front part of the piston, wear bushing, and the
retainer pin.
3. Store the hydraulic breaker in a dry place.
Always keep the breaker in an upright position, if
stored for a long time.

Disposal

A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. The
remaining hydraulic oil must be deposited and any
negative influence on the environment is to be kept
as low as possible.
22 9800 1050 90 | Original instructions
RX 2, 3, 4, 6, 8