Technical Data - Leister FUSION 2 Instrucciones De Funcionamiento

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product,
in the version as brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
Harmonized Standards:
Kaegiswil, 28.11.2011
Disposal
Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only
for EC countries: Do not dispose of power tools into household waste! According to the European
Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national
law, power tools that are no longer suitable for use must be separately collected and sent for recovery
in an environmental-friendly manner.

Technical Data

Voltage
Mains voltage is not reversible
Power consumption
Frequency
Air flow (20°C)
Air temperature
Plasticizer temperature
Size L × W × H
Weight
without Power supply cord
Mark of conformity
Mark of approval
Certification scheme
Protection class II
Welding rod mm
(in accordance with DVS 2211)
Ø 3; Welding output [ kg/h ]
(Average values at 50 Hz)
Ø 4; Welding output [ kg/h ]
(Average values at 50 Hz)
Ø 5; Welding output [ kg/h ]
(Average values at 50 Hz)
Technical data and specifications are subject to change without prior notice.
2004/108, 2006/95.
EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 50366, EN 62233, EN 60335-2-45.
Bruno von Wyl, CTO
V~
W
Hz
l/min
°C
°C
mm (without welding shoe) 450 × 98 × 225
kg
FUSION 2 FUSION 3C
Ø 4 mm Ø 3 / Ø 4 mm
Ø 4 ± 0.3 Ø 3 / Ø 4 ± 0.3 Ø 4 / Ø 5 ± 0.3 Ø 3 / Ø 4 ± 0.3 Ø 4 / Ø 5 ± 0.3
PE 2.0 – 2.5
PP 1.8 – 2.3
PE 1.3 –1.8 PE 2.7 – 3.6
PP 1.3 – 1.8 PP 2.5 – 3.4
Beat Mettler, COO
FUSION 2 FUSION 3C
230 230
2800 2800
50/60 50/60
approx. 300 approx. 300
max. 340 max. 350
max. 300 max. 320
588 × 98 × 225
5.9 6.9
2 2
3 3
CCA CCA
4 4
FUSION 3C
Ø 4 / Ø 5 mm Ø 3 / Ø 4 mm
PE 2.0 – 2.5
PP 1.8 – 2.3
PE 2.1 – 2.6 PE 2.7 – 3.6
PP 1.8 – 2.4 PP 2.5 – 3.4
PE 2.7 – 3.6
PP 2.5 –3.4
FUSION 3
230
3500
50/60
approx. 300
max. 350
max. 320
690 × 98 × 187
7.2
2
3
CCA
4
FUSION 3 FUSION 3
Ø 4 / Ø 5 mm
PE 2.1 – 2.6
PP 1.8 – 2.4
PE 2.7 – 3.6
PP 2.5 –3.4
11