Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
(Translation of the original operating instructions)
Bedienungsanleitung vor Inbetriebnahme aufmerksam
lesen und zur weiteren Verfügung aufbewahren.
Leister TWINNY S
AUTOMATIC COMBI-WEDGE WELDING MACHINE
APPLICATION
The Leister TWINNY S is an Automatic Combi-Wedge Welding Machine for overlap
welding and manufacturing of films and geomembrane liners in tunnels as well
as earthwork and civil engineering. The heat is transmitted by using the best
combination of contact and hot air.
Type
Hot Wedge System
Civil Engineering
Combi-wedge
Tunnel
Construction
Combi-wedge
• Overlap
max. 125 mm / 5 inch
• Type of seam Welding seams are produced in accordance with DVS 2225
part 1 and BAM. Other dimensions are possible on request.
DVS: German Welding Association
BAM: Federal Institute for Materials Research and Testing, Berlin
TECHNICAL DATA
Voltage
Power consumption
Frequency
Temperature
Welding Pressure
Antrieb Drive
Emissions level
Size L × B × H
Weight
Mark of conformity
Mark of approval
Certification scheme
Protection class II
Technical data and specifications are subject to change without prior notice.
# mains voltage cannot be switched over
Type of Material
PE-HD, PE-C, PFA, PD, PP
Long
PVC-P, PE-LD, ECB, EVA
Short
PE-HD, PE-C, PFA, PD, PP
PVC-P, PE-LD, ECB, EVA
V~
W
Hz
°C / °F
N /lbs (pound) max. 1000
m/min. /feet 0,2 – 2,5 (4,0)
L
(dB)
pA
mm
kg
Material Thickness
0,8 – 2,0 mm
1,0 – 3,0 mm
0,3 – 1,0 mm
0,3 – 2,0 mm
100, 120, 200, 230 #
1600, 1900, 2200, 2300/2900
50 / 60
20 – 600
71
350 × 390 × 270
6,9
(Civil Engineering)
2
3
CCA
4
/ 6,5
(Tunnel Construction)
GB
15
Publicidad
Tabla de contenido
