Step 3 - Turning On Your Camera; Step 4 - Selecting Wi-Fi Or Access Point Mode; Step 5 - Connecting Your Mobile Device To The Camera - Angelcare AC1200 Manual Del Proprietário

STEP 3 - TURNING ON YOUR CAMERA

1
30
2

STEP 4 - SELECTING WI-FI OR ACCESS POINT MODE

1

STEP 5 - CONNECTING YOUR MOBILE DEVICE TO THE CAMERA

5.1 - SETTING UP CAMERA(S) VIA
1
3
10
All manuals and user guides at all-guides.com
s
WIRELESS SETUP
2
1) Press the Camera POWER ON/OFF
button and wait for the activation sound
(Router activation time is approximately
30 seconds).
NOTE:
Blue night light will start flashing and Status
Light will turn from white to red until a twinkling
sound confirms the complete activation.
2) Rotate the Camera Adjustment Wheel
to the top position.
1) Set your Camera to your
preferred mode:
Internet Mode (go to step 5.1)
Access Point Mode (go to step 5.2)
(no internet connection required)
NOTE:
If you do not have Internet and choose the Access
Point Mode, the Camera will create a local WI-FI
signal.
1) In the Angelcare app, select 'continue'
to setup your camera.
2) Type in the network password if your
network has one.
3) A QR Code will be appear
on your device screen.
4) Proceed to STEP 6.