Flash Exposure Compensation; Manual Flash - Sigma EF-630 Manual De Instrucciones

FLASH EXPOSURE COMPENSATION

Compensating only the light amount of the flash is possible without
affecting exposure of the background.
It can be used with [TTL], [WL
and [WL ] flash modes.
SLAVE
Set the compensation amount in the
Mode details area. The compensation
amount has 1/3 steps (when the
camera has 1/2 steps, it is changed to
1/2 steps) and up to ±3 steps can be set.
Do not use the flash exposure compensation function on the camera.

FEB SHOOTING (Flash Exposure Bracketing)
Three photographs can be taken by changing the flash amount.
It can be used with [TTL], and [WL
flash modes.
Set the compensation amount in the
Mode details area. The compensation
amount has 1/3 steps (when the camera
has 1/2 steps, it is changed to 1/2
steps) and up to ±3 steps can be set.
Take three photographs while checking
the charged amount with the ready
light.
The three photographs are in an order of appropriate exposure →

under exposure → over exposure.
FEB icon will change as follows depending on the frame number.

1st Frame
],
TTL
]
TTL
( WL )
TTL
MODE
2nd Frame 3rd Frame
When three photographs have been taken, FEB is automatically

released.
FEB can be combined with the flash exposure compensation.

FE LOCK SHOOTING
This is a shooting method that exposes any desired section of the
subject with the correct flash exposure.
It can be used with [TTL], and [WL
1. Focus on the subject.
2. Align the section of the scene which you require the flash
exposure to be correct to the center of the image. Press the
[M-Fn] button on the camera.
The flash preflashes, and the flash amount necessary for the

subject is stored.
[FEL] is displayed for approximately 0.5 seconds in the finder.

3. Decide the composition and take pictures.
If [ ] blinks in the finder, the flash amount is insufficient. Change

the conditions and re-lock the FE.
The allocated FE lock buttom varies depending on the actual

camera. Please refer to the instruction manual of your camera.

MANUAL FLASH

Discretional setting of the flash amount
is possible.
1. Set the Flash mode to [MANUAL].
2. Set the flash amount in the Mode
details area. (Available range for
setting: 1/128 to 1/1, Available pitch
] flash modes.
TTL
25