Storage; Reset Heater - Vornado VMH10 Manual Del Usuario

STORAGE

During the off-season or after extended periods of non-use, you may choose to store your heater.
To ensure long life of the product, it is recommended to store your heater by following these
instructions:
Cleaning is recommended before storage.
1. Unplug power cord and
bundle loosely.
2. Cover, or place back in retail
carton if available. This prevents
heater from accumulating dust over time.
3. Store heater in cool and
dry location.
DISPOSAL
Dispose of all packaging materials in an
environmentally responsible manner.
14 English

RESET HEATER

RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed to prevent overheating.
Overheating may occur when the inlets or outlet are blocked. If this happens, the safety shut-off
system cuts power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Power heater On. Your Vornado Heater should
now function normally.
Note: If the safety shut-off system repeatedly shuts
off your heater or if it will not reset after following
the above procedure, call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
English
15