Kit Assembly - Metra 95-6546B Instrucciones De Instalación

1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Snap the radio trim panel over the radio
assembly to complete the installation.

KIT ASSEMBLY

(Figure A)
3
REV. 8/3/2021 INST95-6546B