Factory Reset; Cleaning; Contacting Customer Service; Limited Warranty - Bose SoundLink Color Guia Del Usuario

Care and Maintenance
Problem
No audio from the
AUX device
Poor sound quality
from an AUX device

Factory reset

To restore the speaker to factory default settings (clear memory, clear language
selection, etc.) make sure the speaker is connected to a power source, then press
and hold and

Cleaning

To clean the exterior surface of your product, you can wipe it using a soft, dry
cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any openings.

Contacting Customer Service

For questions about your speaker, contact your local Bose dealer.
To contact Bose directly, visit: http://global.Bose.com
US only: http://owners.Bose.com/SoundLinkColor

Limited Warranty

Your Bose SoundLink
®
Details of the limited warranty are provided on the product registration card that is
included in the carton. Please refer to the card for instructions on how to register.
Failure to register will not affect your limited warranty rights.
16 - English
What to do
• Make sure the connected mobile device is on and playing.
• Press the AUX button and check that the AUX indicator is on.
• Make sure the 3.5 mm plug is fully inserted into the speaker, and
fully inserted into the source device.
• Turn up the speaker volume to make sure the speaker is not muted.
• Increase the volume level on the AUX device.
• Try using a different AUX cable.
• Make sure the audio cable is firmly connected to the AUX IN
connector speaker and the source device.
• Try connecting a different AUX device.
at the same time for ten seconds.
Color Bluetooth
®
speaker is covered by a limited warranty.
®