Sanus VISIONMOUNT VMA301 Manual Del Usuario página 6

2
1
2
6
1. Fit the iPad™ into the mount, bottom edge fi rst. Angle the iPad™ back
while pressing back on the locking tab of the mount. Fit the top edge
of the iPad™ under the tab.
2. Press on the rear of the locking tab and ensure that the tab is fully
engaged and the iPad™ is secure in the mount.
3. To release the iPad™ from the mount: fi rmly hold the iPad™ while
pressing back on the tab to release and remove the iPad™.
3
6901-002116<01>