Eaton Powerware Manual Del Usuario página 4

SERVICE AND SUPPORT
230V UPS (P08, P14, and P23) uses power cord from server/device; plug type varies by country.
1
120V UPS (P07 and P13) input power cord type NEMA WD-1 5-15P; 1 1 20V UPS (P22) input power cord type
NEMA 5-20P.
230V UPS uses included equipment cord(s), type IEC 320-C13 to IEC 320-C14; quantity varies by model.
2
120V UPS uses server/device power cord terminated in NEMA WD-1 5-15P (IBM plug type 4).
Additional power cord(s) included with server/device; plug varies by country.
3
Figure 1. Connecting Server/Device with One Power Cord to UPS
Figure 2. Connecting Server/Device with Two Power Cords (Dual-Redundant) to UPS
Figure 3. Connecting Server/Device with Three Power Cords (Redundant) to UPS
4 EATON Powerware
Legend (Figure 1–Figure 3)
UPS
2
1
UPS
2
1
UPS
2
1
3
® Service and Support for IBM ® Applications
Server/Device
Server/Device
3
TVSS Protected or
Second UPS
Server/Device
164201422 Rev B Final Draft 27-Jul-2005
S