Introduction; Overview; Equipment - ESAB Warrior 500i CC/CV Instrucciones De Uso

3 INTRODUCTION

3 INTRODUCTION
3.1

Overview

The Warrior 500i CC/CV is a welding power source intended for GMAW welding, as well as
for welding with powder-filled cored wire (FCAW-S), for GTAW welding, for welding with
coated electrodes (SMAW) and arc air gouging.
The power sources are intended for use with the following wire feed units:
• Warrior Feed 304
• Warrior Feed 304w
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
3.2

Equipment

The power source is delivered with:
• 5 m return cable with ground clamp
• Instruction manual
0463 341 131 - 8 - © ESAB AB 2013